Review status information for a Z45 Controller
The system status, network status, and data usage information for a Z45 Controller can be displayed in the Device Summary page.
System Status
The system status information is calculated for the current data as of the last time that the device reported information.
| Item | Description |
|---|---|
| Temperature (Avg./Low/High) | The average, low, and high device temperatures for the selected date. |
| Voltage (Avg./Low/High) | The average, low, and high voltage measurements for the selected date. |
| OS Uptime | How long the device has been powered and running on the selected date. |
| OS Uptime Pct. | The percentage of the time on the selected date that the device has been powered and running. |
Data Usage
Data usage is calculated over an entire billing cycle. The Starting Day notes the day in the billing cycle the current date is on. The Current values show the value on the date selected from the Date pop-up calendar. The Previous values show the values on the same day in the billing cycle from the previous billing cycle.
| Item | Description |
|---|---|
| Starting Day | The in the billing cycle that the current date is on. |
| Current Sent | The total data amount used to send data from the device to Digi Axess through the selected date. |
| Current Received | The total data amount used to receive data sent from Digi Axess to the device through the selected date. |
| Current Total |
The total current data usage: Current Sent + Current Received |
| Previous Sent | The total data amount used to send data from the device to Digi Axess through the same day in the billing cycle from the previous billing cycle. |
| Previous Received | The total data amount used to receive data sent from Digi Axess to the device tthrough the same day in the billing cycle from the previous billing cycle. |
| Previous Total |
The total previous data usage: Previous Sent + Previous Received |
Network Status
| Item | Description |
|---|---|
| Record Start Time | The start date and time on which information for the selected day was collected. |
| Record End Time | The end date and time on which information for the selected day was collected. If the current date is selected, the end time is the last time a connect was made. |
| Band | The cellular frequency band. |
| Carrier ID | The carrier identification code. |
| Network SID | The network security identifier. The number of times this changed during the selected date is noted. |
| Network Service | The cellular network currently being used. The number of times this changed during the selected date is noted. |
| Roaming | Specifies whether roaming is being used for the cellular connection. The number of times this changed during the selected date is noted. |
| RSSI (Avg/Low/High) | The average, low, and high signal strength for the selected date. |
| Connection Attempts/Success | The number of cellular connection attempts made and the number that of attempts that were successful. |
| Total Connection Time | The total length of time the device was connected to the cellular network on the selected day. |
| Connection Time Avg. | The average length of time of all connection events on the selected day. |
| Connection Time Min | The minimum length of time of a connection event on the selected day. |
| Connection Time Max | The maximum length of time of a connection event on the selected day. |
| Connection Time Pct. | The percent of the total connected time that the device was connected to the cellular network on the selected day. |
PDF
