Digi Axess mapped device list

A list of the mapped devices displays in the lower left corner of the map. Only devices that have latitude and longitude coordinates assigned display in the list.

Up 20 devices are included in the list, and match the devices that are in the viewable map area. As you change the focus of the map, or zoom in or out, the list is updated to match the devices displayed on the map.

You can hover or click on a device name to display more information about the device.

Click a device name

Click the name of a device to display the Device Summary page with status information about the device. For information about this page, see Review device status information in the Device Summary page.

Hover over a device name

When you hover over a name in the list or over a location pin on the map, a dialog that shows information about the location displays: the latitude and longitude of the location, and the location name and status.

Item	Description
Color bar	Denotes the status of the location, which matches the location pin color.
Coordinates	The latitude and longitude of the device's physical location. Connect Sensor+: Location coordinates are configured manually. See Configure a Connect Sensor+ location with manually defined coordinates. Digi Connect Sensor XRT-M NEMA: Location coordinates can be configured manually or using the device's GPS. See Configure the location for a Connect Sensor XRT-M with manually defined coordinates or Configure the location for a Connect Sensor XRT-M device with GPS-defined coordinates. Z45 Controller: If the Z45 Controller has a cellular network connection, the coordinates can be determined using the GPS on the device. You can also manually assign a latitude and longitude. For more information, see Configure the location coordinates for a Z45 Controller.
Location Name	The name assigned to the device.
Location Status	The status of the location, which coordinates with the color assigned to the location pin. The location status is determined by the Location Status items, which are a set of metrics tracked by the firmware. OK: Green color bar. All of the Location Status items are green. Warning: Yellow color bar. At least one of the Location Status items is yellow. The rest may be green or yellow, but none are red. Problem: Red color bar. At least one of the Location Status items is red. Gray color bar. The device has not connected to Digi Axess within the last 24 hours.