Data Export: Manage MQTT configuration (Connect Sensor XRT-M only)

You can configure MQTT for a Connect Sensor and enable or disable the MQTT service from the Administration dashboard in Digi Axess or from a Connect Sensor web UI.

Note Any MQTT configurations created in the Digi Axess Administration menu can be applied to a device from the device's web UI. The device must be in the device group selected for the MQTT configuration. See Configure MQTT for a device from the web UI (Connect Sensor XRT-M only).

CAUTION! The MQTT feature is a Beta feature, and while it is included in the production firmware, it is not fully tested. Any feedback you have after using this feature can be sent to Digi Sales.