Configure MQTT for a device from the web UI (Connect Sensor XRT-M only)

You can configure MQTT for a Connect Sensor and enable or disable the MQTT service from the web UI for a Connect Sensor XRT-M only.

You can choose to create an MQTT configuration for this device only, or to apply an MQTT configuration that was created for the device group in which this device is included. MQTT configurations are created for a device group in the Digi Axess Administration menu.

CAUTION! The MQTT feature is a Beta feature, and while it is included in the production firmware, it is not fully tested. Any feedback you have after using this feature can be sent to Digi Sales.