Formulas: Manage in Digi Axess Admin (Connect Sensor only)

Note This feature is for Connect Sensor family variants only.

Formulas use the input data collected from a device and apply calculations to provide a meaningful output. A formula is connected to an input on a device, and the formula runs every time data is collected on the device for that input.

Formulas are built as a set of sequential steps. For each step, you choose a formula option and a formula operator to create an output which can be reviewed in Digi Axess.

Where are formulas used?

After a formula has been created, you can connect the formula to an input configuration on an input pin, and then enable the configuration. If you want the data from the input configuration to be included in the Device Summary page, you can select a display group.

Stop a formula from running

When you no longer want the formula to run, you can remove it from the input.

Managing formulas

From the Administration dashboard, you can add, edit, and delete formulas.

Note Formulas, as well as formulas for a specific device, can be created and managed from the web UI for the device. See Formulas: Manage from the web UI.