Log into the Connect IT from the Console port

You can use this console port to connect the Connect IT to your computer and then log in to the Connect IT. This is useful if a network isn't available. When using this method, only CLI commands are available.

1. Connect one end of a serial cable to the console port on the Connect IT.
2. Connect the other end of the serial cable to the serial port on your computer. If you don't have a serial port, you can use a console adapter accessory with a straight through RJ45 cable to connect a serial port on a computer to the console port of the Connect IT. For more information, see the Console port hardware section.
3. Access a terminal screen on your computer.
4. When prompted, enter your user name and password.
5. Use the CLI commands to configure the Connect IT.