Connect with BLE and configure your XBee 3 802.15.4 RF Module

You can use the Digi XBee Mobile application to verify that BLE is enabled on your XBee 3 802.15.4 RF Module.

  1. Get the Digi XBee Mobile phone application.
  2. Open the Digi XBee Mobile application. The Find XBee devices screen appears and the app automatically begins scanning for devices. All nearby devices with BLE enabled are displayed in a list.
  3. Scroll through the list to find your XBee device.
    The first time you open the app on a phone and scan for devices, the device list contains only the name of the device and the BLE signal strength. No identifying information for the device displays. After you have authenticated the device, the device information is cached on the phone. The next time the app on this phone connects to the XBee device, the IMEI for the device displays in the app device list.

Note The IMEI is derived from the SH and SL values.

  1. Tap the XBee device name in the list. A password dialog appears.

  2. Enter the password you previously configured for the device in XCTU.
  3. Tap OK. The Device Information screen displays. You can now scroll through the settings for the device and change the device's configuration as needed.