$V, $W, $X, $Y (SRP password verifier)

Note You should only use these commands if you have already configured a password on the XBee device and the salt verifier values correspond to the password.

The $V, $W, $X, and $Y commands are used in conjunction with the $S command used to create an encrypted password for the XBee device. Together with the $S command, these commands authenticate the client for the BLE API Service without storing the XBee password on the XBee device.

The salt is configured in the $S command. In the $V, $W, $X, and $Y verifiers, you specify the 128-byte verifier value, where each command represents 32 bytes of the total 128-byte verifier valule.

Parameter range

1 - 32 bytes (1-64 hexadecimal characters in command mode)

Default

0