This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
The Link Key used for encryption and decryption. If C8 (802.15.4 Compatibility) bit 2 is cleared, encryption/decryption uses the 256 bits of the KY value (all 64 ASCII characters of the KY value). C8 bit 2 sets encryption/decryption, and uses the last 32 ASCII characters of the 256-bit KY value entered.
This command is write-only. If you attempt to read KY, the device returns an OK status.
Set this command parameter the same on all devices in a network.
256-bit value (up to 32 hex bytes/64 ASCII bytes)
0