This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
Sets or displays the operational compatibility with a legacy DigiMesh 2.4 device (S1 or older versions of S2C firmware). This parameter should only be set when operating in a mixed network that contains XBee Series 1 or XBee S2C devices that cannot be updated to version 9002.
0, 4
Bit field:
| Bit | Meaning | Setting | Description |
|---|---|---|---|
| 2 | TX compatibility | 0 |
When encryption is enabled, AES Counter mode is used with a 256-bit key. |
| 1 |
When encryption is enabled AES ECB mode is used with a 128-bit key. This is compatible with legacy versions of DigiMesh 2.4. |
4