Use the mobile app to view sensor data streams

Connect Tank connects to the Digi Connect Wizard mobile app using Bluetooth Smart (low energy). The Digi Connect Wizard mobile app allows you to view real-time sensor data on a nearby mobile device.

Note When using an Android device, make sure it is running Android 4.4.3 or later.

To install and run the app:

  1. Download the Digi Connect Wizard app.
  1. Enable Bluetooth on your device and make sure it is near the Connect Tank device.
  2. Open the app.
  3. Wake the Connect Tank.

  4. Tap Read Sensors > Find Devices to scan for devices.

  5. Tap your Connect Tank to list sensors on the device.
  6. Tap a sensor name to see real-time data. Data points load at 5-second intervals.

Connect Tank goes into sleep mode when you close the app. If you keep the app open, Connect Tank remains awake and takes sensor readings. The device goes into sleep mode after 60 minutes. Keeping the app open for long periods of time can reduce battery life.