Connect Tank LEDs

Connect Tank has four LED indicators to monitor Bluetooth connection, sensor activity, cellular connection, and battery life. If Connect Tank is powered and all LEDs are off, it is sleeping, or doing a scheduled wake-up.

Note The LED indicators only light up when you wake the device by manual intervention: pressing the Wake button on the device or using a magnet. When the device wakes up to take and push readings, the LEDs do not light up since no one may be physically present to see the LED start-up sequence. See Wake Connect Tank for more information about the LED indicators start-up sequence.

Item	LED	Description
1	Bluetooth	Indicator light for Bluetooth communication: Yellow blinking: Bluetooth is on and Connect Tank is discoverable. The LED blinks for up to 30 seconds. Yellow solid: A Bluetooth device is attached. Not lit: No Bluetooth devices were found or attached. Note Bluetooth must be enabled on the Connect Tank for the Bluetooth LED to light up. See Configure local interface settings: CLI and Bluetooth.
2	Sensor reading	Indicator light for the sensor(s): Green blinking: One or more sensors are reading the environment. Not lit: The LED turns off when readings are complete.
3	Cellular	Indicator light for the cellular network connection: Solid purple: Connect Tank is waking. Red blinking: Searching for the cellular network. Blue: Blinking: Connected to the cellular network and attempting to communicate with Remote Manager Solid light: Successfully sent data to Remote Manager. LED turns off after a few seconds.
4	Battery	Indicator light for battery function: Solid purple: Connect Tank is waking The following patterns are based on the Global Alarm > Battery Life setting in Remote Manager: Red blinking: Indicates battery life is less than or equal to the Battery Life alarm. Blue blinking: Indicates battery life is greater than the Battery Life alarm.