Discover the IP address using the Digi Navigator

You can use the Digi Navigator to quickly discover the IP address for the Connect EZ.

Note If you don't have access to the Digi Navigator, you can use a manual method to discover the IP address. See Discover the device's IP address: Additional methods.

1. To ensure that your computer and device are connected to each other and your local network, make the following connections:

   • Connect the device to your computer with an Ethernet cable.

   • Connect the device to your local network with an Ethernet cable.

   • Connect your computer to your local network with an Ethernet cable.

2. Download and install the Digi Navigator.

3. Launch the Digi Navigator.

4. The tool discovers the Connect EZ devices that are powered on and connected to your network. When the process is complete, a list of the devices appears.

   • Connected to a network: By default, the HTTPS service is enabled and used to find an IP address for the Connect EZ. Other services can be enabled if needed from the Filters section. See Services used to discover a device when connected to a network.

   • Connected directly to a device or on a network with no DHCP server: In either of these situations, a setup IP address is assigned to the device. You can specify the filters used to assign an IP address. See Use the autodiscovery protocol to discover a device and Assign a generic IP address to the device.

5. Expand a device to display the IP address.