Access a device's web UI from the Digi Navigator

You can access the device's web UI and log in from the Configuration pane in the Digi Navigator, or from the shortcut menu for the device's IP address.

The service options are available in the Configuration pane or the shortcut menu if these conditions are met:

• The service button must be included in the Services filter. See Filter the device list by service option.

• At least one device must be configured for the service. For known devices, see Specify the IP address to discover a Digi device.

To access a device's web UI:

1. Make sure Digi Navigator is installed and the Connect EZ is powered and connected to your local network or to your computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. A list of the devices discovered by the Digi Navigator displays. For information about how devices are discovered and how to add a device to the list, see Digi Navigator device discovery process.

4. Find the device that you want to access and expand it to display the IP addresses for the device.

5. Launch the web UI for the device using one of the following methods:

   • Configuration pane: Click on an IP address for the device to display the configured service button(s) in the Configuration pane. Click on any of the active buttons (HTTP, HTTPS, SSH) to access the web UI and log in.

   • Shortcut menu: Right-click on the IP address for a device to display the shortcut menu. Click on any of the service options (HTTP, HTTPS, SSH) to access the web UI and log in.