Filter the device list by RealPort configuration status

You can use the RealPort option to filter which devices are included in the device list, depending on the RealPort configuration status.

1. Make sure Digi Navigator is installed and the Connect EZ is powered and connected to your local network or to your computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. From the toolbar, click Filters > Devices > Supported Services. Use the RealPort menu option to filter the devices.

   • Selected: Only discovered devices that are configured for the RealPort service display. Known devices are included if the device is configured for RealPort.

   • Not selected: All discovered devices on your network and all known devices display, regardless of RealPort service configuration status.