Filter the device list for auto-discovered devices

You can use the Discovered Devices option to filter which devices are included in the device list, depending on whether the device was auto-discovered or is a device that was manually added to the known device list.

1. Make sure Digi Navigator is installed and the Connect EZ is powered and connected to your local network or to your computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. From the toolbar, click Filters > Devices. Use the Discovered Devices menu option to filter the devices.

   • Selected: Both known and discovered devices are listed.

   • Not selected: Only known devices are listed.