Automation example when running DAL OS firmware 24.9 version or older

Do you want to configure a new automation or modify an already existing one so modem firmware upgrades for the Verizon, T-Mobile, and AT&T carriers for your EX50 routers are done automatically?

This following automation workflow includes steps to upgrade modem firmware, back up DAL OS firmware, disable SureLink and SIM failover, verify current firmware versions, and confirm successful upgrades.

Checks to see if the modem firmware has already been upgraded. If it has, no further action is taken.

Updates the DAL OS configuration settings you specify.

Pauses device activity to allow necessary processes to finish.

Creates a backup of the device’s operating system to ensure recovery.

Temporarily disables connectivity management features to prevent interference during the update.

Checks whether the modem is available and ready for interaction.

Introduces a wait period for modem to reboot and the system to stabilize.

Verifies if the current installed firmware version matches a specific requirement for one carrier.

Initiates the upgrade process for the required firmware version of the specified carrier.

Introduces another wait period for modem to reboot and the system to stabilize.

Checks whether a different firmware version is required for another carrier.

Initiates an upgrade to the specified firmware version for the next carrier.

Introduces another wait period for modem to reboot and the system to stabilize.

Verifies the current firmware version against the required version for another carrier.

Initiates an update to match the required firmware version for the provider.

Introduces another wait period for modem to reboot and the system to stabilize.

Final step confirming the entire process has been completed and is modem is stable.