Step 2: Enable the AnywhereUSB Service

You must enable the AnywhereUSB service and specify a port to be able to connect the to AnywhereUSB ports on your Connect EZ 16/32 from the AnywhereUSB Manager.

For detailed information about all of the optional fields, see Configure AnywhereUSB services.

Note You can also enable the AnywhereUSB service and specify the port on the AnywhereUSB Configuration page. To display this page, click System > Configuration > AnywhereUSB Configuration. See AnywhereUSB Configuration page.

  1. Open the web UI.

  2. Click System > Configuration > Device Configuration. The Configuration window displays.
  3. Click Services > AnywhereUSB.

  4. Click Enable to enable the service.

  5. In the Port field, enter the port number that is used to access the Hub. The default value is 18574. If you change the port number you must also change the corresponding port number on your computer.

  6. Click Apply to save the configuration and apply the change.

 

NEXT STEP: Proceed to the next step: Step 3: Name groups and assign ports to a group.