Connect SFP+ modules

You can choose to connect up to two SFP+ modules to the Connect EZ.

Note When you use an SFP+ module, you cannot use the equivalent Ethernet port. For example, if you insert an SFP+ module into the SFP+1 slot, you cannot use the ETH1 slot. If you insert an SFP+ module into the SFP+2 slot, you cannot use the ETH2 slot.

1. Orient the device so the front of the device is facing you.
2. Insert the first SFP+ module into the SFP+1 slot on the Connect EZ.
3. Insert the second SFP+ module into the SFP+2 slot on the Connect EZ.

4. To be able to use the SFP+ ports, you must enable and configure the SFP+ ports.