Show L2TP tunnel status

 

  Web

Show the status of L2TP access connectors from the WebUI

    Log into the IX40 WebUI as a user with full Admin access rights.

  1. On the menu, select Status. Under VPN, select L2TP > Access Connectors.

    The L2TP Access Connectors page appears.

  2. To view configuration details about an L2TP access connector, click the (configuration) icon in the upper right of the tunnel's status pane.

Show the status of L2TP network servers from the WebUI

    Log into the IX40 WebUI as a user with full Admin access rights.

  1. On the menu, select Status. Under VPN, select L2TP > Network Servers.

    The L2TP Network Servers page appears.

  2. To view configuration details about an L2TP network server, click the (configuration) icon in the upper right of the tunnel's status pane.

Show the status of L2TP access connectors from the Admin CLI

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. To display details about all configured L2TP access connectors, type the following at the prompt:
    > show l2tp lac

 Name       Enabled  Status  Device
 ---------  -------  ------  -----------
 lac_test1  true     up      test_device0
 lac_test2  true     pending
>
  3. To display details about a specific tunnel:
    > show l2tp lac name lac_test2

 lac_test2 L2TP Access Concentrator Status
 ------------------------------------
 Enabled         : true
 Status          : pending

>
  4. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.

Show the status of L2TP network servers from the Admin CLI

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. To display details about all configured L2TP access connectors, type the following at the prompt:
    > show l2tp lns
 
 Name       Enabled  Status  Device
 ---------  -------  ------  -----------
 lns_test1  true     up      test_device0
 lns_test2  true     pending

>
  3. To display details about a specific tunnel:
    > show l2tp lns name lns_test2

 lns_test2 L2TP Access Concentrator Status
 ------------------------------------
 Enabled         : true
 Status          : pending

>
  4. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.