Update a configured output pin on a Z45 Controller

You can change an output pin that has been configured.

1. Log into the Z45 Controller's web UI.

2. Navigate to the Output Configuration page.

   1. From the Options section, click Applications. The Available Applications page displays.

   2. Click Automation Control. The Management & Administration page displays.

   3. Click Outputs. The Output Configuration page displays.

3. In the Output Type column, click on the type for pin that has been configured: Numeric, Digital, or Hex. The Output Pin X Configuration page displays, where X is the input pin number.

   Note An output pin with the Disabled output type has not been configured.

4. Configure the output pin, as desired, for the selected output type. For detailed information about each input type, see:

   • Configure a digital output pin on a Z45 Controller

   • Configure a numeric output pin on a Z45 Controller

   • Configure a hex output pin on a Z45 Controller

5. When changes are complete, click Update. A confirmation dialog displays.

6. Click OK to save your changes.