Update a configured input pin on a Z45 Controller

You can change an input pin that has been configured.

1. Log into the Z45 Controller's web UI.

2. Navigate to the Input Configuration page.

   1. From the Options section, click Applications. The Available Applications page displays.

   2. Click Automation Control. The Management & Administration page displays.

   3. Click Inputs. The Input Configuration page displays.

3. In the Input Type column, click on the type for pin that has been configured: Numeric, Digital, or Hex. The Input Pin X Configuration page displays, where X is the input pin number.

   Note An input pin with the Disabled input type has not been configured and can be configured.

4. Configure the input pin, as desired, for the selected input type. For detailed information about each input type, see:

   • Configure a numeric input pin on a Z45 Controller

   • Configure a digital input pin on a Z45 Controller

   • Configure a hex input pin on a Z45 Controller

5. When changes are complete, click Update. A confirmation dialog displays.

6. Click OK to save your changes.