Change the cellular connection type (Connect Sensor XRT-M only)

By default, the cellular connection for a Connect Sensor XRT-M device is set to M1. You can change the connection type if needed, such as to an NB-IoT connection.

1. Log into the Connect Sensor web UI on Digi Axess.

2. From the Interfaces section, click Wireless. The Wireless Interface Configuration page displays.

3. Click Edit.

4. In the Modem Configuration section, click the Iot Tech list box.

5. Select the desired cellular connection option, such as NB-IoT.

6. Click Update to save the changes. Click Cancel to revert to the current configuration.