Install a saved configuration file on a Z45 Controller

This process installs the Z45 Controller configuration from a back up file saved on your computer or to a USB flash drive.

Note The network loaded on the Z45 Controller (AT&T, Verizon, Sprint, or Generic) on which you are installing a back up file must match the network that was on the Z45 Controller that was backed up.

  1. If you are installing a saved configuration from a USB flash drive, connect the USB flash drive to the Z45 Controller.

  2. Access the device's web UI from the Device Summary page.

  3. Click Admin Main.

  4. From the Options section, click System Tools. The Tools and Utilities page displays.

  5. Click Backup/Restore.

  6. From the Select a Location section, click Local Storage or USB Drive.

  7. From the Select an Option section, click Install.

  8. From the Select a Module section, click Entire System. The Select a File list box displays.

  9. From the Select a File list box, select the back up file that you want to install.

  10. Click Submit. When the backup is complete, a success message displays on a green banner.

  11. If you installed the configuration from a USB flash drive, remove the USB drive.

  12. Power down the Z45 Controller.

  13. Insert an active SIM card. The SIM card network (AT&T, Verizon, Sprint, or Generic) must match the network for the installed configuration.

  14. Power up the Z45 Controller.

  15. Verify a network connection (Link LED) on the desired APN.