Back up the Z45 Controller configuration

You can choose to back up the entire configuration of a Z45 Controller onto a USB flash drive or your computer's hard drive.

If you back up a configuration to a flash drive, you can use it as a template and install the same configuration on other Z45 Controllers.

1. If you are backing up the configuration to a USB flash drive, connect a USB flash drive to the Z45 Controller.

2. Access the device's web UI from the Device Summary page.

3. Click Admin Main.

4. From the Options section, click System Tools. The Tools and Utilities page displays.

5. Click Backup/Restore.

6. From the Select a Location section, click Local Storage or USB Drive.

7. From the Select an Option section, click Save/Backup.

8. From the Select a Module section, click Entire System. The File Name field displays.

9. In the File Name field, enter a unique name for the saved file.

10. Click Submit. When the backup is complete, a success message displays on a green banner.

11. If you backed up the configuration to a USB flash drive, remove the USB drive.