Review Notification Services report options

Notification services consists of a list of pre-determined reports that you can associate with a notification group. The reports are sent to the contacts in the notification group.

The report data is collected when the device connects to Digi Axess and transfers data. When Digi Axess detects a data change, it sends the report using the most recently collected data. Z45 Controllers generally sends data once a day. Connect Sensor+ devices send data, depending on each device's connection schedule.

The reports that have been sent can be reviewed in the Device Reports page.

Note You can view the report options but not change a report or add a new one.

1. Access the Digi Axess Admin page. You must have Admin or Device User privileges to access this page. However, only users with Admin privileges can access the Notification Management section.

2. From the Notification Management section in the Admin dashboard, click View next to Notification Services. As an alternative, you can click Notification Services from the dashboard pane on the left of the screen.
3. Review the report options.
   • PDF Monthly Plots: Generates a summary report for the past month using the device configuration ranges. The report is sent after the first device data push of the month.
   • PDF Email Auto-Range Plots: Generates a summary report for the past day using the auto ranges. The report is sent after the first device data push of the day.
   • PDF Email Plots (Defined Range): Generates a summary report for the past day using the device configuration ranges. The report is sent after the first device data push of the day.