Update a configured output pin on a Connect Sensor XRT-M

You can change an output pin that has been configured.

1. Access the device's web UI from the Device Summary page.

2. Navigate to the Output Configuration page.

   1. From the Options section, click Applications. The Available Applications page displays.

   2. Click Automation Control. The Management & Administration page displays.

   3. Click Outputs. The Output Configuration page displays.

3. In the Output Type column, click on the type for pin that has been configured: Numeric, Digital, or Hex. The Output Pin X Configuration page displays, where X is the input pin number.

   Note An output pin with the Disabled output type has not been configured and can be configured. See Configure output pins on a Connect Sensor XRT-M.

4. Configure the output pin, as desired, for the selected output type. For detailed information about each input type, see:

   • Configure a digital output pin on a Connect Sensor XRT-M

   • Configure a numeric output pin on a Connect Sensor XRT-M

   • Configure a hex output pin on a Connect Sensor XRT-M

5. When changes are complete, click Update. A confirmation dialog displays.

6. Click OK to save your changes.