Configure the location for a Z45 Controller with defined coordinates

You can manually configure the physical location for a Z45 Controller's location by defining the device's coordinates.

This feature is useful for stationary installations for which you do not want to use a GPS antenna, or if the device does not regularly connect to the cellular network.

Note If you have a cellular connection, you can use a GPS antenna to determine location coordinates. The Current Status in the GPS Status section is used only when the GPS location service has been selected. See Enable and use GPS location services for a Z45 Controller.

1. Determine the latitude and longitude coordinates for the device's location. You can use the physical address of where the device is located and a mapping application to discover the coordinates.

2. Log into the Z45 Controller's web UI.

3. Click Admin Main.

4. In the Interfaces section, click Location Source.

5. If you have a cellular connection and the GPS feature is enabled, the Location Source list box displays. Select the Use lat/long below option. This disables the cellular discovery of the location coordinates.

6. In the Latitude and Longitude fields, enter the latitude and longitude coordinates for the device's location.

7. Click Update.