Log in to a Connect Sensor device's web UI using a network connection

If your Connect Sensor has a cellular network connection, you can log into the device from a browser window, using the IP address.

Any changes you make are stored and then pushed from Digi Axess the next time that the Connect Sensor wakes and connects to the network.

Before you begin

• Verify that the Connect Sensor is connected to a cellular network.

• Make sure you have the Connect Sensor's IP address.

• Make sure you have the correct user name and password for the Connect Sensor.

To log in to a Connect Sensor from a browser window:

1. Open a browser window on your computer.

2. In the search field, type in the Connect Sensor's IP address. The web UI log in window displays.

3. Enter the correct User name and Password for the device.

4. Click Login. The main web UI page displays.