Configure the APN for the Connect Sensor in Digi Axess

The APN of the SIM that came with the Digi device is auto-detected.

Note Any changes made to the APN Profile configuration may cause the device to no longer connect to the internet. Digi recommends making changes only when you have physical access to the device.

  1. Log into the Connect Sensor web UI on Digi Axess.

  2. From the Interfaces section, click Wireless. The Wireless Interface Configuration page displays.

  3. Click Edit.

  4. Specify a profile name. Options are:

    • Detect Name Automatically: Select this option to detect the default profile name.

    • Define Name: Select this option and enter a name in the field.

  5. In the Username field, enter the user name.

  6. Specify a password.

    • Select Use Existing Password to retain the current password.

    • Select Update Password to change the password. Enter the new password in the New Password field, and then enter the same password in the Confirm Password field.

  7. Specify a PIN.

    • Select Use Existing Pin to retain the current PIN.

    • Select Update Pin to change the password. Enter the new password in the New Pin field, and then enter the same password in the Confirm Pin field.

  8. In the Mtu field, enter the largest PDU that can be communicated.

  9. Click Update to save the changes. Click Cancel to revert to the current configuration.