Enable HTTP access and allow LAN and WWAN port access on a Z45 Controller

The Web Administration section of the Security Preferences screen enables you to

enable or disable HTTP access through the WAN, LAN, or both. You can also specify an IP port number other than 80 for HTTP access through the WAN, LAN, or both.

1. Access the device's web UI from the Device Summary page.

2. Click Admin Main.

3. In the Services section, click Security Preferences. The Security Preferences page displays.

4. Display the Web Administration section.

5. Select Allow on LAN Interface Port if you want to allow web access over a LAN port. In the port field, enter the IP port number. The default is 80.

6. Select Allow on WWAN Interface Port if you want to allow web access over a WWAN port. In the port field, enter the IP port number. The default is 80.

7. Select Enable HTTPS if you want to use secure HTTP. If you do not select this option, non-secure HTTP is used.

8. In the Session Timeout field, enter the maximum amount of idle time that is allowed before a session times out. The time is measured in minutes. The default is 10 minutes.

9. Click Update.