Managing Geo-Fences functions

In the following descriptions, P1, P2, P3, etc. are used to indicate positional parameters or arguments that must be specified when using a function. Each parameter or argument given to a function must be separated by a single space.

Geo-Fence - Set

The Geo-Fence Set function enables or disables a pre-configured geo-fence on the unit. Geo-fences are configured on the Z45 Controller’s Location Source screen and may be either assigned to automation control for use with this function, or operated from the web interface.

P1 Fence to use

[1]: Fence configuration 1

[2]: Fence configuration 2
P2 Function

[0]: Disable

[1]: Enable

Example: Enable fence configuration 2