Configure system logging for a Connect Sensor XRT-M in the Devices page

You can configure system logging for a Connect Sensor XRT-M in the Devices page for the device. This feature is useful as a support tool and does not need to be enabled unless you are instructed to do so.

Note You can also configure system logging for a device from the device's web UI.

When enabled, system events are stored on the device. Each time that the Connect Sensor XRT-M wakes up and connects to Digi Axess, either at the scheduled wake time or if it is done manually with a magnet, a log is pushed from the device to Digi Axess. The logs are listed in the Device Logs window, and can be downloaded and saved on your computer.

The logs are collected for the number of days specified. When the time limit is reached, the logging feature is automatically disabled and logs are no longer collected from the device.

When new logs are sent from the device to Digi Axess, any logs over seven days old are automatically cleared. You can also manually clear any logs when needed.