Discover the IP address using the Digi Navigator

You can use the Digi Navigator to quickly discover the IP address for the Connect EZ 4/4i.

Note If you don't have access to the Digi Navigator, you can use a manual method to discover the IP address. See Discover the device's IP address: Additional methods.

1. To ensure that your computer and device are connected to each other and your local network, make the following connections:

   • Connect the device to your computer with an Ethernet cable.

   • Connect the device to your local network with an Ethernet cable.

   • Connect your computer to your local network with an Ethernet cable.

2. Download and install the Digi Navigator.

3. Launch the Digi Navigator.

4. The tool discovers the Connect EZ 4/4i devices that are powered on and connected to your network. When the process is complete, a list of the devices appears.

   • Connected to a network: By default, the HTTPS service is enabled and used to find an IP address for the Connect EZ 4/4i. Other services can be enabled if needed from the Filters section. See Services used to discover a device when connected to a network.

   • Connected directly to a device or on a network with no DHCP server: In either of these situations, a setup IP address is assigned to the device. You can specify the filters used to assign an IP address. See Use the autodiscovery protocol to discover a device and Assign a generic IP address to the device.

5. Expand a device to display the IP address.