Show IPsec status and statistics

 

  Web

    Log into the Connect EZ 4/4i WebUI as a user with full Admin access rights.

  1. On the menu, select Status > IPsec.

    The IPsec page appears.

  2. To view configuration details about an IPsec tunnel, click the (configuration) icon in the upper right of the tunnel's status pane.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the Connect EZ 4/4i local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. To display details about all configured IPsec tunnels, type the following at the prompt:
    > show ipsec all

 Name    Enable  Status   Hostname
 ------  ------  -------  ---------------
 ipsec1  true    up       192.168.2.1
 vpn1    false   pending  192.168.3.1

>
  3. To display details about a specific tunnel:
    > show ipsec tunnel ipsec1

 Tunnel                   : ipsec1
 Enable                   : true
 Status                   : pending
 Hostname                 : 192.168.2.1
 Zone                     : ipsec
 Mode                     : tunnel
 Type                     : esp

>
  4. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.