Local users are authenticated on the device without using an external authentication mechanism such as TACACS+ or RADIUS. Local user authentication is enabled by default, with one preconfiged default user.
Default user
At manufacturing time, each Connect EZ 2 device comes with a default user configured as follows:
- Username: admin.
- Password: The default password is displayed on the label on the bottom of the device.
Note The default password is a unique password for the device, and is the most critical security feature for the device. If you reset the device to factory defaults, you must log in using the default user and password, and you should immediately change the password to a custom password. Before deploying or mounting the Connect EZ 2 device, record the default password, so you have the information available when you need it even if you cannot physically access the label on the bottom of the device.
The default admin user is preconfigured with both Admin and Serial access. You can configure the admin user account to fit with the needs of your environment.
This
PDF
