Use the autodiscovery protocol to discover a device

If a Digi device is directly connected to a computer or connected to a network with no DHCP server, you can assign an IP address to the Digi device so that the device is automatically discovered.

1. Make sure Digi Navigator is installed and the Connect EZ 2 is powered and connected to your local network or to your computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. From the toolbar, click Filters > IP Addresses > 169.254.100.100.

4. Log into the device and set a unique IP address for the device that is appropriate for the network on which it will be deployed. See Define a static IP address.