Step 2: Connect the power supply

The power supply is included with the device.

The power supply is a Direct Plugin Class 2 output transformer rated 18 W, 12 VDC, with 1.5 A output.

1. Orient the device so the top of the device is facing you.

2. Connect the twist-lock end of the power supply cord to the device.

3. Plug the other end of the power supply cord to a mains power supply.

4. As the device powers up, multiple LEDs may blink, including the Power LED. When complete, the Power LED is solid blue.

 

NEXT STEP: If you are performing the initial device set-up, proceed to the next step: Step 3: Connect to site network using an Ethernet LAN.