This procedure is not available through the WebUI. To move or rename a file or directory by using the Admin CLI, use the mv command.
Command line
To rename a file named test.py in /etc/config/scripts to final.py:
- Select the device in Remote Manager and click Actions > Open Console, or log into the IX30 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
- At the Admin CLI prompt, type:
> mv /etc/config/scripts/test.py /etc/config/scripts/final.py >
- Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.
To move test.py from /etc/config/scripts to /opt:
- Select the device in Remote Manager and click Actions > Open Console, or log into the IX30 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.
- At the Admin CLI prompt, type:
> mv /etc/config/scripts/test.py /opt/ >
- Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.
PDF
