Display directory contents

To display directory contents by using the WebUI or the Admin CLI:


    Log into the IX30 WebUI as a user with full Admin access rights.

  1. On the menu, click System. Under Administration, click File System.

    The File System page appears.

  2. Highlight a directory and click to open the directory and view the files in the directory.
  1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the Admin CLI prompt, type ls /path/dir_name. For example, to display the contents of the /etc/config directory:
    > ls /etc/config
-rw-r--r--    1 root     root           856 Nov 20 20:12 accns.json
drw-------    2 root     root           160 Sep 23 04:02 analyzer
drwxr-xr-x    3 root     root           224 Sep 23 04:02 cc_acl
-rw-r--r--    1 root     root            47 Sep 23 04:02 dhcp.leases
...
>
  3. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.