Configure Application mode

The Serial Configuration page is displayed.

Note You can also configure the serial port by using Device Configuration > Serial. Changes made by using either Device Configuration or Serial Configuration will be reflected in both.

(Optional) For Label, enter a label that will be used when referring to this port.

Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

> config
(config)>

(config)> serial port1 enable false
(config)>

(config)> serial port1 mode application
(config)>

(config)>path-paramlabel label
(config)>

(config)> save
Configuration saved.
>

Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.