Connect to the local Web UI on the Connect EZ

Once you are connected to the local Web UI, you can configure your device.

  1. Make sure that an Ethernet cable is connected to the Connect EZ's Ethernet port and to a laptop or PC.

  2. Open a browser and enter the IP address for the device. The web UI log in screen displays.

  3. Log into the device using the default user name and password. The default user name is admin and the default password is the unique password printed on the label packaged with your device.

  4. After logging in, the local web admin dashboard is displayed.

The dashboard shows the current state of the device. For more information about the dashboard, see Using the local web interface.