Show status and statistics of the NTP server

You can display status and statistics for active NTP servers

 

  Web

    Log into the IX15 WebUI as a user with full Admin access rights.

  1. On the main menu, click Status.
  2. Under Services, click NTP.

    3. The NTP server status page is displayed.

Show NTP information

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX15 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. Use the show ntp command at the system prompt:
    > show ntp

 NTP Status Status
 -----------------
 Status      : Up
 Sync Status : Up

 Remote            Refid          ST  T  When  Poll  Reach  Delay   Offset  Jitter
 ----------------  -------------  --  -  ----  ----  -----  ------  ------  ------
 *ec2-52-2-40-158  129.6.15.32    2   u  191   1024  377    33.570  +1.561  0.991
 128.136.167.120   128.227.205.3  3   u  153   1024  1      43.583  -1.895  0.382

>
  3. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.