Clear the network cache

You can clear all the network information the IX15 stores, that is, eliminate already discovered nodes and empty its network cache to start from scratch. The CLI command to clear the network cache is xbee network clear.

After that, the only node in the network cache is the local XBee device.

Example: xbee network clear

> xbee network clear

> xbee network show
64-bit address    Node identifier       Role          16-bit address    Firmware      Hardware
----------------  --------------------  ------------  ----------------  ------------  ------------------------------
0013A200417BD6ED  C1-EU8                Coordinator   00 00             1009          XBee 3 Micro and SMT (0x41)

>