Show script information

You can view status and statistics about location information from either the WebUI or the command line.

 

  Web

    Log into the IX15 WebUI as a user with full Admin access rights.

  1. At the Status page, click Scripts.

    The Scripts page displays:

 

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX15 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. Use the show scripts command at the system prompt:
    > show scripts

 Index  Label        Enabled  Status  Run time
 -----  -----------  -------  ------  --------
 0      script1      true     active
 1      script2      true     idle     01:00
>
  3. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.