Show DNS server

You can display status for DNS servers. This command is available only at the Admin CLI.

 

  Command line

Show DNS information

1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10 local command line as a user with full Admin access rights.

   Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

2. Use the show dns command at the system prompt:

   > show dns
   
    Interface  Label  Server                    Domain
    ---------  -----  ------------------------  ------
    eth1              192.168.3.1
    eth1              fd00:2704::1
    eth1              fe80::227:4ff:fe2b:ae12
    eth1              fe80::227:4ff:fe44:105b
    eth1              fe80::240:ffff:fe80:23b0
   
   >

3. Type exit to exit the Admin CLI.

   Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.