Digi IX10 Certifications

You can review certification information for the IX10 on the Digi Certifications page.

International EMC (Electromagnetic Compatibility) and safety standards

This product complies with the requirements of the following Electromagnetic Compatibility standards.

There are no user-serviceable parts inside the product. Contact your Digi representative for repair information.

Certification category	Standards
Electromagnetic Compatibility (EMC) compliance standards	EN 300 328 v1.8.1 EN 301 893 v1.7.2 EN 301 489 FCC Part 15 Subpart B Class B
Safety compliance standards	EN 62368 UL 121201, CSA C22.2 No. 213 Hazardous Location designation: SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D
E-UTRA CA, E-UTRA FDD, E-UTRA TDD, UMTS FDD	PTCRB
Cellular carriers	See the current list of carriers on the Digi IX10 product page, in the Specifications tab, Approvals section.
Electrical safety compliance	The IX10 model 50002009-01 shall be powered using a DC power source Approved in its country of use as per ES1 [IEC 62368-1:2014(Ed.2.0)] or SELV [Safety Extra Low Voltage as per IEC 60950-1:2005(ED 2) + A1, A2.