use all hub addresses

Enable or disable the AnywhereUSB Manager from connecting to extra IPv4 IP addresses.

The AnywhereUSB Hub may have default IP addresses that are reported by mDNS to the AnywhereUSB Manager, but in many network environments, the Manager cannot connect to them. As part of normal operation, the Manager tries to sequentially connect to all of the Hub IP addresses, so if it starts trying these extra default IPv4 IP addresses, it may take extra time (minutes) for the Manager to connect or reconnect.

By default, this option is deselected and the Manager does not attempt to connect to these addresses.

Note This can also be done in the Preferences dialog. See Use all Hub IPv4 addresses.

Syntax

USEALLHUBADDRS,[on|off]

Parameters

off: Disable the feature. The AnywhereUSB Manager will not attempt to connect to the extra IPv4 IP addresses. This is the default.

on: Enable the feature. The AnywhereUSB Manager will attempt to connect to the extra IPv4 IP addresses.