Remove the mounting brackets (AnywhereUSB Plus 8 and 24 only)

You can remove the mounting brackets from the Hub. Each bracket is attached to the Hub with four screws. After removing the screws and the brackets, you should retain the parts for future use.

Before you begin, make sure you have an appropriate Phillips or flat-head screwdriver.

1. Orient the device so that one side is facing you.

2. Using your screwdriver, unscrew the four screws from the bracket.

3. Repeat the process to remove the other bracket on the other side of the device.

4. Gather the two brackets and eight screws and retain the parts for future use.