Command line interface: AnywhereUSB Manager

You can manage the AnywhereUSB Manager features from the command line.

Prerequisites for the AnywhereUSB Manager commands

• Service: If you run the AnywhereUSB Manager as a service, you need to be an Administrator. The service must be running.
• Stand-alone: If you run the AnywhereUSB Manager as a stand-alone, you need to be the same user that started the Manager, or an Administrator. The AnywhereUSB Manager must be open and active.

Get a device or group address, or a Hub name

For some CLI commands you will need to provide a device address, a group address, or a Hub name. You can use the list command to get that information. See the list command for examples.

AnywhereUSB Manager CLI commands